CAD
Revolve a Plane to Determine Its True
Size 448 Determine the True
Angle between Two Intersecting
Planes by Revolution 450
Determine the True Angle between
Two T T Intersecting Oblique
Planes 451 Revolve a Point
About A A an Oblique Axis to Determine
Its Path 452
14 Intersections 463
CAD
Intersection of Two Planes
(Orthographic Projection
Method) 474 Intersection of Two
Planes (Auxiliary View Method) 476
Intersection of an Inclined Plane and
a Prism (Orthographic Projection
Method) 478
CAD
Intersection of an Inclined Plane and
a Prism Using the Section Plane
Command 479
CAD
Intersection of an Oblique Plane and a
Prism (Cutting Plane Method) 480
Intersection of an Oblique Plane and an
Oblique O O Prism (Auxiliary View
Method) 482 Intersection of Two
Prisms (Cutting Plane Method) 484
CAD
Intersection of Two Prisms Using the
Intersect Command 485
CAD
Intersection of Two Prisms (Auxiliary
View Method) 486 Intersection of
a Plane and a Cylinder (Orthographic
Projection Method) 486
Intersection of an Oblique Plane and
a Cylinder (Cutting Plane
Method) 488 Intersection of an
Oblique Plane and an Oblique
Cylinder (Auxiliary View
Method) 490 Intersection of a
Cylinder and a Prism 492
Intersection of Two Cylinders 494
Intersection of an Inclined Plane and
a Cone 494 Intersection of a
Cylinder and a Cone 496
15 Developments 509
CAD
Development of a Rectangular
Prism 512 Development of an
Oblique Prism 514 Development
of a Cylinder with an Inclined
Bevel 516 Development of a
Right Pyramid 520 Development
of a Truncated Right Pyramid T T 522
Development of a Pyramid Inclined to
the Base 522 Development of a
Right Cone 524 Development of
a Truncated T T Right Cone 526
Development of a Truncated Cone
Inclined to the Base 528
Development of Transition
Pieces 532 Development of a
Warped W W Surface 534
18 Threads and Fastening Devices 615
Construct a Detailed Representation
of Sharp V Threads 623
Construct a Detailed Representation
of Square Threads f 624 Construct
a Detailed Representation of Acme
Threads 625 Construct a
Schematic Representation of
Threads 626 Construct Square
Bolt Heads and Nuts 630
Construct Hexagonal Bolt Heads and
Nuts 630
19 Cams, Gears, and Splines 651
CAD
Construct a Modified Uniform fi
Motion Cam 656 Construct a
Harmonic Motion Cam 658
Construct a Uniformly Accelerated
Motion Cam 660
Drafting Procedures 19