699 Chapter 28 Spray Technique Copyright Goodheart-Willcox Co., Inc. 10. Technician A says that an inline air regulator decreases the volume of air delivered to the spray gun. Technician B says that the air pressure should be set without pulling the trigger on the spray gun. Who is right? (A) A only. (B) B only. (C) Both A and B. (D) Neither A nor B. 11. A right-handed painter is preparing to spray the left fender of a vehicle in a down-draft spray booth. The painter’s right foot should be positioned at _____. (A) the middle of the fender (B) the front of the fender (C) the middle of the door (D) the rear of the fender 12. The release of the trigger at the end of the stroke is known as _____. (A) arcing (B) heeling (C) triggering (D) banding 13. A pickup truck bed side must be painted. Technician A wants to walk the panel. Technician B wants to paint the panel in sections. Who is right? (A) A only. (B) B only. (C) Both A and B. (D) Neither A nor B. 14. A vehicle is to be painted in a down-draft spray booth. Technician A says to spray from bottom to top. Technician B says to spray from top to bottom. Who is right? (A) A only. (B) B only. (C) Both A and B. (D) Neither A nor B. 15. A replacement radiator support must be repainted. Technician A says to use a touchup spray gun because it can fit into confined spaces. Technician B says to use a conventional spray gun but to turn down the fan and material. Who is right? (A) A only. (B) B only. (C) Both A and B. (D) Neither A nor B.