316 Geometric Dimensioning and Tolerancing Copyright Goodheart-Willcox Co., Inc. Drafting Problems Drafting problems are provided for drafting technology students in the Drafting Prob- lems section of this textbook. Drafting problems are presented as pictorial illustrations or design layouts. This requires you to determine the correct views, dimensions, and GD&T placement. Drafting problems can be completed by creating and dimensioning orthographic views, or by creating 3D models as determined by your course objectives. The Drafting Problems section of this textbook contains Problems 1–21. Problems 22–39 are included in the instructor’s resources for this textbook. Ask your instructor or refer to the course outline for specific assignments and problems to create for this chapter. Instructions for completing problems are given in the Drafting Problems section of this textbook. Drafting problems for Chapter 7 are drawn by placing all dimensions, notes, and GD&T symbols unless otherwise assigned by your instructor. Draw the appropriate orthographic views with dimensions or create 3D models as assigned by your instructor. The following are drafting problems recommended for this chapter: Drafting Problems 2, 5, 15, 22, 24, 31, 34, 35, 36, and 37.