19 Copyright Goodheart-Willcox Co., Inc. Chapter 1 Introduction to Dimensioning and Tolerancing 11. True or False? Standard tolerance application methods are required because inconsistent application methods would result in unclear requirements being shown. 12. True or False? Working on the basis of incorrectly applied tolerances has the potential to result in disagreements about whether or not parts are properly made. 13. True or False? The standard position for the top view is above the front view when third angle projection is used. Fill in the Blank 14. The ASME ____________ standard specifies requirements for applications in models, saved views in models, and orthographic drawing views generated from model geometry. Short Answer 15. Why is it necessary to have an accurate distance measurement standard in industry? 16. Cite one example of how a machinist can help a designer apply dimensions and tolerances in the best manner. 17. Show a general note that should be included in a product definition that primarily has millimeter dimensions. 18. Explain why an incorrectly applied tolerance can be a problem. 19. Why is it necessary for a tool designer to be able to interpret dimensions and tolerances? 20. Why is it important to know whether first or third angle projection is applicable to an orthographic drawing?