Machining Fundamentals, 9th Edition Page i (1 of 656)

Copyright © 2014
by
The Goodheart-Willcox Company, Inc.
Previous editions copyright 2004, 2000, 1998, 1993, 1989, 1981, 1977, 1973
All rights reserved. No part of this work may be reproduced, stored, or transmitted in any
form or by any electronic or mechanical means, including information storage and retrieval
systems, without the prior written permission of The Goodheart-Willcox Company, Inc.
Manufactured in the United States of America.
Library of Congress Catalog Card Number 2012050405
ISBN 978-1-61960-209-0
2 3 4 5 6 7 8 9 – 14 – 17 16 15 14
The Goodheart-Willcox Company, Inc. Brand Disclaimer: Brand names, company names, and illustrations for products
and services included in this text are provided for educational purposes only and do not represent or imply endorsement or
recommendation by the author or the publisher.
The Goodheart-Willcox Company, Inc. Safety Notice: The reader is expressly advised to carefully read, understand, and apply
all safety precautions and warnings described in this book or that might also be indicated in undertaking the activities and
exercises described herein to minimize risk of personal injury or injury to others. Common sense and good judgment should also
be exercised and applied to help avoid all potential hazards. The reader should always refer to the appropriate manufacturer’s
technical information, directions, and recommendations; then proceed with care to follow specifi c equipment operating
instructions. The reader should understand these notices and cautions are not exhaustive.
The publisher makes no warranty or representation whatsoever, either expressed or implied, including but not limited to equipment,
procedures, and applications described or referred to herein, their quality, performance, merchantability, or fi tness for a particular
purpose. The publisher assumes no responsibility for any changes, errors, or omissions in this book. The publisher specifi cally
disclaims any liability whatsoever, including any direct, indirect, incidental, consequential, special, or exemplary damages resulting,
in whole or in part, from the reader’s use or reliance upon the information, instructions, procedures, warnings, cautions, applications,
or other matter contained in this book. The publisher assumes no responsibility for the activities of the reader.
The Goodheart-Willcox Company, Inc. Internet Disclaimer: The Internet resources and listings in this Goodheart-Willcox
Publisher product are provided solely as a convenience to you. These resources and listings were reviewed at the time of
publication to provide you with accurate, safe, and appropriate information. Goodheart-Willcox Publisher has no control over
the referenced websites and, due to the dynamic nature of the Internet, is not responsible or liable for the content, products, or
performance of links to other websites or resources. Goodheart-Willcox Publisher makes no representation, either expressed or
implied, regarding the content of these websites, and such references do not constitute an endorsement or recommendation of the
information or content presented. It is your responsibility to take all protective measures to guard against inappropriate content,
viruses, or other destructive elements.
Cover image credit: sspopov/Shutterstock.com
Library of Congress Cataloging-in-Publication Data
Walker, John R.,
Machining fundamentals / by John R. Walker, Bob A. Dixon.
—Ninth edition.
pages cm
Includes index.
ISBN 978-1-61960-209-0
1. Machine-shop practice. 2. Machining. I. Title. II. Author
TJ1160 .W25 2014
671.3′5--dc23
2012050405

Previous Page Next Page

Extracted Text (may have errors)

Help

loading