349 Copyright Goodheart-Willcox Co., Inc. 10. _____ indicates how parallel the rim is to the hub and causes side-to-side wobble. A. Radial runout B. Rim offset C. Lateral runout D. None of the above. 11. _____ shows how concentric (round) the rim is with the hub and causes up-and-down movement. A. Radial runout B. Rim offset C. Lateral runout D. None of the above. 12. True or False? Wheels for tube and tubeless tires can be used interchangeably. 13. True or False? Tire size is determined by rim offset. 14. _____ will cause the tire to skid and the tread to wear at its center. A. Low air pressure B. High air pressure C. Sidewall bending D. Separated cord layers 15. True or False? To balance a wheel, install wheel weights on the lightest side of the rim. Suggested Activities 1. Following the procedures in the service manual, check the front and rear wheels of a randomly selected vehicle for trueness and balance. 2. Following procedures in the service manual, remove the bearings of a motorcycle wheel. Clean, inspect, repack, and replace the bearings. 3. Following procedures in the appropriate service manuals, remove and replace the tires on a: A. Wire wheel. B. Cast wheel. C. Stamped wheel.