27 Copyright Goodheart-Willcox Co., Inc. Review Questions Answer the following questions using the information provided in this chapter. 1. Which of the following is not acceptable shop attire? A. Steel-toe shoes. B. Long pants. C. Rings. D. Short-sleeved uniform shirt. 2. It is not dangerous to wear _____ when working in the shop. A. steel-toe boots B. watches C. bracelets D. cut-off shorts 3. When should a technician wear safety glasses, goggles, or face shield? A. Drilling operations. B. Cleaning a part with compressed air. C. Grinding operations. D. All of the above. 4. Soiled rags should be _____. A. piled in a corner B. stored in a lid-sealed metal container C. stored in a plastic bucket D. burned 5. True or False? Oil absorbent can be used to clean a gasoline spill. 6. All of the following are conditions that must be present for a fire to take place, except: A. oxygen must be present. B. there must be a supply of burnable material, or fuel, available. C. carbon monoxide must be present. D. temperature must be above the fuel’s flash point. 7. True or False? Most shops have multipurpose ABC dry chemical fire extinguishers. 8. Which of the following materials is not a hazardous waste? A. Used gear oil. B. Contaminated fuel. C. Solvents. D. Distilled water. 9. Every employee of a motorcycle shop is protected by _____ when handling dangerous chemicals. A. Right-to-Know laws B. record keeping C. the DOT D. hazardous waste disposal 10. True or False? Every chemical in the shop must have an SDS. Suggested Activities 1. Draw a diagram of the shop that shows the location of all safety equipment, including fire extinguishers, first-aid kits, eye wash stations, fire alarms, and emergency exits. 2. Use the Internet to research shop safety, and use the information found to begin a safety notebook. 3. Contact your local fire department regarding training on the use of fire extinguishers in the shop.