Copyright © 2008
by
The Goodheart-Willcox Company, Inc.
Previous editions copyright 1995, 1990, 1984, 1981, 1978, 1974
Previously published and copyrighted as
Drafting for Industry by the Goodheart-Willcox Company, Inc.
All rights reserved. No part of this work may be reproduced,
stored, or transmitted in any form or by any electronic or
mechanical means, including information storage and retrieval
systems, without the prior written permission of
The Goodheart-Willcox Company, Inc.
Manufactured in the United States of America.
Library of Congress Catalog Card Number 2007036343
ISBN 978-1-59070-903-0
1 2 3 4 5 6 7 8 9 – 08 – 18 17 16 15 08
The Goodheart-Willcox Company, Inc. Brand Disclaimer: Brand names, company names, and illustrations for
products and services included in this text are provided for educational purposes only and do not represent or imply
endorsement or recommendation by the author or the publisher.
The Goodheart-Willcox Company, Inc. Safety Notice: The reader is expressly advised to carefully read,
understand, and apply all safety precautions and warnings described in this book or that might also be indicated
in undertaking the activities and exercises described herein to minimize risk of personal injury or injury to others.
Common sense and good judgment should also be exercised and applied to help avoid all potential hazards. The
reader should always refer to the appropriate manufacturer’s technical information, directions, and recommendations;
then proceed with care to follow specifi c equipment operating instructions. The reader should understand these
notices and cautions are not exhaustive.
The publisher makes no warranty or representation whatsoever, either expressed or implied, including but not
limited to equipment, procedures, and applications described or referred to herein, their quality, performance,
merchantability, or fi tness for a particular purpose. The publisher assumes no responsibility for any changes,
errors, or omissions in this book. The publisher specifi cally disclaims any liability whatsoever, including any direct,
indirect, incidental, consequential, special, or exemplary damages resulting, in whole or in part, from the reader’s
use or reliance upon the information, instructions, procedures, warnings, cautions, applications, or other matter
contained in this book. The publisher assumes no responsibility for the activities of the reader.
Library of Congress Cataloging-in-Publication Data
Kicklighter, Clois E.
Drafting and design : engineering drawing using manual
and CAD techniques / by Clois E. Kicklighter.
p. cm.
Includes index.
ISBN 978-1-59070-903-0
1. Mechanical Drawing. 2. Computer-aided design. 3.
Engineering graphics. I. Brown, Walter Charles. II. Title. III.
Title: Engineering drawing using manual and CAD techniques.
T353.K466 2008
604.2--dc22 2007036343
2